31 Photos
Ziegler Cat 75 kW Mobile Generator Set
Located
Billings, MT
Billings, MT
Usage
4,396 hrs
4,396 hrs
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15516550
In yard
No
Features
93.75 kVA/75 kW Rated 3 Phase Output, 240 V / 277 V Rated Voltage, 56.25 kVA,/45 kW, Rated Single Phase Output, 120 V / 230 V Rated Voltage, 240 V & 120 V Receptacles, Bottom Mounted Fuel Tank, Kamag 755X9E 75 kW Generator, Cat 8 Cylinder Diesel Engine, Ball Hitch Carrier Trailer, Electric Brakes
General Appearance
Serial Number / VIN
No serial number or manufacturer’s identifying number found. This unit may be difficult to export.
Hour Meter / Odometer
4396 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Generator
Disconnect Switch
Not operationally checked
Receptacles
Not operationally checked
Power Generation
The main components appear to be in place. The generator is producing electrical current.
Control Station
Gauges
Operational
Engine Oil Pressure
The gauge registers in the operating range.
Limited Function Check
The main components are in place and operational as noted.
Engine
Emissions Status
No US EPA Label Present
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Fuel System
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Trailer Chassis
Axle Condition
Brake Type
Electric Brakes
Limited Function Check - Brakes
The brakes were not operationally checked
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs
Springs/Hangers Condition
Tongue/ Hitch Condition
No visible damage
Lights/Wiring Condition
Not operationally checked
Frame Rails/ Main Beams Condition
Landing Gear / Tongue Jack
Fuel Tank Condition
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jul 14, 2026 |
| Silicon | 0 PPM |
| Tin | 0.86 PPM |
| Silver | 0 PPM |
| Aluminum | 0.28 PPM |
| Chromium | 0.12 PPM |
| Lead | 2.12 PPM |
| Copper | 0.6 PPM |
| Nickel | 0.57 PPM |
| Iron | 36.65 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.