Ocana, ESP

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 20-30 tons.Max Opening: 33 in. Max Cuntting Force: 120 tons. Weight: 3576 lb. Equipped with a Swiss imported motor with 360 degree rotation and imported NOK oil seal. Blades are both replaceable and reversible. The integrated speed valve and piston rodguards also improved work efficiency.

to fit 9 - 25 ton excavators • CE Marked

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 24-40 ton excavators. Max Opening: 30 in. Max Crushing Force: 150 tons. Weight: 5750 lb. Equipped with Swiss imported motor with rotation and imported HALLITE oil seal. Blades are both replaceable and reversible. With Swedish Hardox 500 steel • lightweight and wear-resistant; The pin is made of 42CrMo alloy steel with high strength and toughness;

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 12-20 tons. Max Opening: 30 in. Max Cuntting Force: 255 tons.Weight:2213lb.Equipped with a Swiss imported motor with 360 degree rotation and imported NOK oil seal. Blades are both replaceable and reversible. The integrated speed valve and piston rodguards also improved work efficiency. The blade length is 280mm. fast opening and closing speed • flexible and easy to operate • equipped with a synchronization device • and two scissor bodies can move simultaneously. 

to fit 15 - 35 ton excavators • CE Marked

to suit 18-24 ton excavator • Operating pressure: 150-180 bar • hydraulic flow range 90-120 L/min • Copy of declaration of confirmity available • 1400 kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 5-9 tons. Max Opening: 12 in . Shear Opening 11 in 300mm，Shear depth 12 in 310mm.Weight: 1226 lb . Made of Swedish Hardox Hituf steel • good toughness and wear resistance: The pin is made of 42CrMo alloy steel with high strength and toughness; Light weight shell structure. The large oil cylinder adopts honing tube and imported NOK oil seal • with short working cycle and long service life. The blade is made of wear-resistant alloy steel • which is resistant to high temperature and deformation.

Suitable for Cat336 or 30-38 ton excavators. Capacity: 2 yd³. Weight: 3968 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

to fit 4 - 12 ton excavators • CE Marked

turn table • to suit 18-24 ton excavator • two engines • shell wide 800mm • weight 1000kg

Suitable for Cat345 or 40-55 ton excavators. Capacity: 3.5 yd³. Weight: 6354 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

Suitable for Cat345 or 40-55 ton excavators. Capacity: 3.5 yd³. Weight: 6354 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

to fit 7 - 16 ton excavators • CE Marked

Suitable for Cat336 or 30-38 ton excavators. Capacity: 2.3 yd³. Weight: 3567 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

Suitable for Cat336 or 30-38 ton excavators. Capacity: 2.3 yd³. Weight: 3567 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 20-25 ton excavators. Max Opening: 31 in. Max Crushing Force: 80 tons. Weight: 3347 lb. Equipped with Swiss imported motor with rotation and imported HALLITE oil seal. Blades are both replaceable and reversible. With Swedish Hardox 500 steel • lightweight and wear-resistant;The pin is made of 42CrMo alloy steel with high strength and toughness; Opening 800mm. The bite depth is 830mm. Overall structural reinforcement design • with a self weight of 1.6 tons. Inverted 220 cylinder • standard with acceleration valve. The fully enclosed shell design can protect the oil cylinder. 

Suitable for Cat336 or 30-38 ton excavators. Capacity: 1.5 yd³. Weight: 3492 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

Suitable for Cat336 or 30-38 ton excavators. Capacity: 1.5 yd³. Weight: 3492 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

to fit 6 - 14 ton excavators • CE Marked

to fit 6 - 14 ton excavators • CE Marked

to suit 7 •5-14 ton excavator • with load holding valve • closing force 48kN • opening width 1500mm • weight 520kg

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.2 yd³. Weight: 2249 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.2 yd³. Weight: 2249 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500.

to fit 3 •5 - 9.5 ton excavators • CE Marked

to fit 3 •5 - 9.5 ton excavators • CE Marked

to suit 3 •5-10 ton excavator with load holding valve • closing force 29kN • opening width 1206mm • weight 300kg

to suit 14-20 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 70-120 l/min •Overall length without mount: 1830 mm • opening wide 735mm • weight 1300kg

to fit 3 •5 - 9.5 ton excavators • CE Marked

to fit 1.5 - 5.5 ton excavators • CE Marked

to fit 1.5 - 5.5 ton excavators • CE Marked

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 30-38 ton excavators. Weight: 1640 lb. Using Q345 manganese plate steel • high strength and corrosion resistance; The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness.

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb. Working Pressure: 200-240 bar. Oil Flow: 160-200 L/min. Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Working Pressure: 200-240 bar. Oil Flow: 160-200 L/min. Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools

to fit 9 - 19 ton excavators • CE Marked

to fit Caterpillar 330

Deutz V6 Diesel Engine

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 40-49 ton excavators. Weight: 2460 lb. Using Q345 manganese plate steel • high strength and corrosion resistance; The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness.

to fit 3 - 6.5 ton excavators • CE Marked

to suit 0 •8-2 ton excavator • Oil flow (l/min) 25-35 • operating pressure (bar) 150-210 • weight (kg) 52 • Copy of declaration of confirmity available

to fit 5.2 - 11.5 ton excavators • CE Marked